Tuna Dawg Aluminium Boats
113 Oak Ridge, drive
Laplace, LA 70068
Contact: Brett Bourlet
Phone: 985-966-7399
Email: brett@tunadawg.com

About Us

Tuna Dawg Aluminium Boats - Builder of custom aluminium boats I have been building custom aluminium boats for over 40 years and build some of the best boats in the world.

From:    To: 

Formatted Directions Map

Sorry, we have no reports to show you at this time.

PHOTO DESCRIPTION LOCATION PRICE

Bay Boat with tunnel Custom alum boat
This is a demo boat with only a few hours on it which can save you 50% off or more. I build only custom one of a kind aluminium boats built for one customer at a time. These hulls are all 3/16 plate and are built for life. This hull will run in 6 inches of water and get on top and plane off in 12 inches of water. Every boat has a different tunnel designed for the customers fishing style.The marine appraisal on this hull is well over 100k. Brett 985-966-7399 www.jumpboats.com or www.tunadawg.com
Phone: 985-966-7399

Laplace, LA 50000
 

Sorry, we have no reports to show you at this time.

PHOTO DESCRIPTION LOCATION PRICE

Bay Boat with tunnel Custom aluminum boat flats boat
This is a demo boat with only a 20 hours on it and it's fully loaded, Epoxy paint and a custom 3m wrap on both sides, Mercury 250 Pro XS with torque master lower unit with a smart gauge,sea star pro hydraulic steering and 15' stainless steering wheel, 12'' T-H hydraulic jack plate, Ray Marine 7 inch dragon fly Pro GPS with chip, 2 - 8' Power Poles, 50 gal live well with aerator system, timer and led lighting, 10'' Trim tabs, 2 -155 amp hours V-Max batteries,minn kota salt water with hydraulic assist lifting 24 Volt trolling motor, Minn Kota MK-210D Digital On-Board Marine Boat Battery Charger,and a new I-beam dual axle aluminum trailer . This boat is over 50% - 70% off book value. I build only custom one of a kind aluminum boats built to last a life time. These hulls are all 3/16 inch and 1/4 inch plate. This hull will run in 6 inches of water and get on top and plane off in less than 6-12 inches of water. Every boat has a different tunnel designed for the customers fishing style.The marine appraisal on this hull is well over 100k. Just ask for a test ride and you will see the difference no glass boat can compare to a custom built aluminum boat. Brett 985-966-7399 www.jumpboats.com or www.tunadawg.com
Phone: 985-966-7399

Laplace, LA 44000

35hp Mud Buddy
35hp Mud Buddy tilt and trim no reverse just did 50 hour maintenance 3 weeks ago and last saturday hour-tach meter quit working so 55-60hrs on unit. Only reason I'm selling it just bought a 50hp Mud buddy. Brett 985 966 7399
Phone: 985-966-7399

Laplace, LA 5500

35hp Mudd Buddy 60 hours
35hp Mud Buddy 60 hours tilt and trim no reverse just did 50 hour maintenance 3 weeks ago and last saturday hour-tach meter quit working so 55-60hrs on unit. Only reason I'm selling it just bought a 50hp Mud buddy. Brett 985 966 7399
Phone: 985-966-7399

Laplace, LA 5500

35hp Mudd Buddy 60 hours
35hp Mud Buddy 60 hours tilt and trim no reverse just did 50 hour maintenance 3 weeks ago and last Saturday hour-tach meter quit working so 55-60hrs on unit. Only reason I'm selling it just bought a 50hp Mud buddy. Brett 985 966 7399
Phone: 985-966-7399

Laplace, LA 5000

Bass Boat / Flats style all deck
Bass Boat - Flats style hull all 3/16' with pad with super slick wearlon bottom paint and the sides have black acrylic car paint , 12' T&H jack plate, Hydraulic steering,Ray marine 7' dragon fly GPS with chip and alum I-beam trailer all new. This hull is all deck with flats style console and cockpit and can easily be a bass boat or flats boat by just moving weight around. It has a large live well dual rod boxes and tons of storage. Every storage box has led lights and is a dry box. The fuel tank is 34 gallons. Brett 985-966-7399
Phone: 985-966-7399

Laplace, LA 15000

Bass Boat / Flats style all deck
Bass Boat - Flats style hull all 3/16' with pad with super slick wearlon bottom paint and the sides have black acrylic car paint , 12' T&H jack plate, Hydraulic steering,Ray marine 7' dragon fly GPS with chip and alum I-beam trailer all new. This hull is all deck with flats style console and cockpit and can easily be a bass boat or flats boat by just moving weight around. It has a large live well dual rod boxes and tons of storage. Every storage box is a dry box with all led lights. Fuel tank is 34 gallon. Brett 985-966-7399
Phone: 985-966-7399

Laplace, LA 15000

Bass Boat / Flats style all deck
Bass Boat - Flats style hull all 3/16' with pad with super slick wearlon bottom paint and the sides have black acrylic car paint , 12' T&H jack plate, Hydraulic steering,Ray marine 7' dragon fly GPS with chip and alum I-beam trailer all new. This hull is all deck with flats style console and cockpit and can easily be a bass boat or flats boat by just moving weight around. It has a large live well dual rod boxes and tons of storage. Every storage box is a dry box with all led lights. Fuel tank is 34 gallon. Brett 985-966-7399
Phone: 985-966-7399

Laplace, LA 15000

22x8 Bay Boat with tunnel
This is a demo boat with only around 20 hours on it and it's fully loaded, Epoxy paint and a custom 3m wrap on both sides, Mercury 250 Pro XS with torque master lower unit with a smart gauge,sea star pro hydraulic steering and 15' stainless steering wheel, 12'' T-H hydraulic jack plate, Ray Marine 7 inch dragon fly Pro GPS with chip, 2 - 8' Power Poles, 50 gal live well with aerator system, timer and led lighting, 10'' Trim tabs, 2 -155 amp hours V-Max batteries,minn kota salt water with hydraulic assist lifting 24 Volt trolling motor, Minn Kota MK-210D Digital On-Board Marine Boat Battery Charger,and a new I-beam dual axle aluminum trailer . This boat is over 50% - 70% off book value. I build only custom one of a kind aluminum boats built to last a life time. These hulls are all 3/16 inch and 1/4 inch plate. This hull will run in 6 inches of water and get on top and plane off in less than 6-12 inches of water. Every boat has a different tunnel designed for the customers fishing style.The marine appraisal on this hull is well over 100k. Just ask for a test ride and you will see the difference no glass boat can compare to a custom built aluminum boat. Brett 985-966-7399 www.jumpboats.com or www.tunadawg.com
Phone: 985-966-7399

Laplace, LA 44000

Bay Boat with tunnel Custom aluminum boat flats boat
This is a demo boat with only around 20 hours on it and it's fully loaded, Epoxy paint and a custom 3m wrap on both sides, Mercury 250 Pro XS with torque master lower unit with a smart gauge,sea star pro hydraulic steering and 15' stainless steering wheel, 12'' T-H hydraulic jack plate, Ray Marine 7 inch dragon fly Pro GPS with chip, 2 - 8' Power Poles, 50 gal live well with aerator system, timer and led lighting, 10'' Trim tabs, 2 -155 amp hours V-Max batteries,minn kota salt water with hydraulic assist lifting 24 Volt trolling motor, Minn Kota MK-210D Digital On-Board Marine Boat Battery Charger,and a new I-beam dual axle aluminum trailer . This boat is over 50% - 70% off book value. I build only custom one of a kind aluminum boats built to last a life time. These hulls are all 3/16 inch and 1/4 inch plate. This hull will run in 6 inches of water and get on top and plane off in less than 6-12 inches of water. Every boat has a different tunnel designed for the customers fishing style.The marine appraisal on this hull is well over 100k. Just ask for a test ride and you will see the difference no glass boat can compare to a custom built aluminum boat. Brett 985-966-7399 www.jumpboats.com or www.tunadawg.com
Phone: 985-966-7399

Laplace, LA 44000

Bay Boat with tunnel Custom aluminium boat flats boat
This is a demo boat with only around 20 hours on it and it's fully loaded, Epoxy paint and a custom 3m wrap on both sides, Mercury 250 Pro XS with torque master lower unit with a smart gauge,sea star pro hydraulic steering and 15' stainless steering wheel, 12'' T-H hydraulic jack plate, Ray Marine 7 inch dragon fly Pro GPS with chip, 2 - 8' Power Poles, 50 gal live well with aerator system, timer and led lighting, 10'' Trim tabs, 2 -155 amp hours V-Max batteries,minn kota salt water with hydraulic assist lifting 24 Volt trolling motor, Minn Kota MK-210D Digital On-Board Marine Boat Battery Charger,and a new I-beam dual axle aluminum trailer . This boat is over 50% - 70% off book value. I build only custom one of a kind aluminum boats built to last a life time. These hulls are all 3/16 inch and 1/4 inch plate. This hull will run in 6 inches of water and get on top and plane off in less than 6-12 inches of water. Every boat has a different tunnel designed for the customers fishing style.The marine appraisal on this hull is well over 100k. Just ask for a test ride and you will see the difference no glass boat can compare to a custom built aluminum boat. Brett 985-966-7399 www.jumpboats.com or www.tunadawg.com
Phone: 985-966-7399

Laplace, LA 44000

32 x 11 alum cat
32 x 11 all alum cat with cuddy cabin in front on one side and the head on the other, 4- 400 quart ice holes with pumps but also drains when on trailer. I built this boat for gulf fishing a dry and smooth riding boat. The hull is foam filled to the top of the gunnel's this boat is unsinkable!!!!!!! Huge hard top and 100 gallon live well with 2 -1100 gph pumps along with storage under seat and also walk in console. This boat was built for myself and looks like a freeman but is made to last a life time unlike the plastic hulls. The sides on this hull are 8' and the waterline is very low which means this will be a dry riding boat. All of the stainless steel hardware is on the boat. If interest I may take 2 partners and totally finish it for spring fishing season. This boat is just to much for myself to handle these days. Only thing left on the hull to build is the motor brackets. Than install the electronics, motors, and top coat of paint or wrap, I can also build a drive on trailer for it. Brett 985-966-7399
Phone: 985-966-7399

Laplace, LA 45000

32 x 11 alum cat
32 x11 all alum cat with cuddy cabin in front on one side and the head on the other, 4- 400 quart ice holes with pumps but also drains when on trailer. I built this boat for gulf fishing a dry and smooth riding boat. The hull is foam filled to the top of the gunnel's this boat is unsinkable!!!!!!! Huge hard top and 100 gallon live well with 2 -1100 gph pumps along with storage under seat and also walk in console. This boat was built for myself and looks like a freeman but is made to last a life time unlike the plastic hulls. The sides on this hull are 8' and the waterline is very low which means this will be a dry riding boat. All of the stainless steel hardware is on the boat. If interest I may take 2 partners and totally finish it for spring fishing season. This boat is just to much for myself to handle these days. Only thing left on the hull to build is the motor brackets. Than install the electronics, motors, and top coat of paint or wrap, I can also build a drive on trailer for it. Brett 985-966-7399
Phone: 985-966-7399

Laplace, LA 45000

Sorry, we have no reports to show you at this time.

Sorry, we have no units to show you at this time.

Sorry, we have no photos to show you at this time.

Sorry, we have no reports to show you at this time.

Sorry, we have no units to show you at this time.

Sorry, we have no photos to show you at this time.

Contact Us

Required Fields are highlighted in *BLUE*
User Verification: